You are here:

Additives for acid copper baths

GMF, elektronics, copper foils, white bronze

Our additives for acid copper baths are ideally suited for decorative processes, surface finishing (GMF) and with copper films for electronics applications. Do you have a special matter you would like to discuss with us or would you like further information? Then please contact us. We are happy to help you.

GMF

General Metal Finishing

Decorative copper layers serve as brighteners and levellers. The copper layers offer improved corrosion protection and are applied underneath the bright nickel layer. In addition to this, copper layers increase the ductility of the metal layer system.

The focus in the decorative segment is especially on levelling. Often used here are dyes that are not easily soluble and require complicated production processes. RASCHIG has recognised the need for dye-free copper baths and, with RALU®PLATE CL 1000, developed a top leveller of the highest quality that also demonstrates extremely low consumption. Your decorative surfaces will shine brilliantly with it.

icon_rund_gruen_3

Top levellers of the highest quality
Use without colourants

RASCHIG leveller

RALU®PLATE CL 1000

Electronics

Computer components

In the electronics segment, acid copper baths are used especially for circuit boards and semiconductors. The most important properties of our additives in the process are meant to assure the separation from the copper lengths and a connection of various levels of the circuit board or of the semiconductor for the interlayer connection of drilled holes. For this reason, copper layers for electronics must have good scattering and ductility in order to prevent cracks. In this way, we also enable use with flexible circuit boards. Because copper baths for electronics are significantly less concentrated than for decorative separations, better scattering is ensured.

icon_rund_gruen_3

Copper layers for electronics
Good scattering and ductility

Leveller

RALUFON® NO 14

Copper foils

Electroforming

A different process is used for the separation of copper foils than with the acid copper baths: instead of coating a surface with copper, layers of the metal are separated. This process is also referred to as electroforming. A roller is first activated as a cathode and dipped into a copper electrolyte, which causes the copper on it to separate.

 

Once the layer thickness necessary for it to be self-supporting following detachment from the cathode has been achieved, the separated metal is removed from the roller as a foil. RASCHIG offers RALU®PLATE SPS to this purpose.

Copper foil for dipping
into copper electrolytes

RASCHIG top brightener

RALU®PLATE SPS

White bronze

with antibacterial and antiallergenic effect

White bronze or silver bronze is an alloy of 55 % copper, 35 % tin and 10 % zinc that resembles bright nickel visually. The special feature here, however, is the wear resistance, which is why white and silver bronze are often used for clothing buttons as an alternative to bright nickel.

 

Due to the antibacterial and antiallergenic effect, white bronze is a popular application for door handles in the medical sector. With RALU®FON CAS-OH, RASCHIG has developed a premium additive that also meets the highest standards.

RASCHIG Nickel Stripper:

RALU®FON CAS-OH